Our on-line battery monitoring system meets enterprise demands
Huasu BMS Company
At present, battery explosion and fire accidents occur frequently in the data room, causing serious losses to the owners. The common battery in the engine room is caused by the explosion and fire caused by the rapid deterioration of one of the batteries after cracking. Since the battery is in series and in parallel, the whole group will spread as long as it burns in a single section, which will lead to a big fire accident.
|
| Result |
| Excessive Cyclic Discharge | The capacity of the battery is affected by the discharge times, and any depth of over-discharge will shorten its life | Rapid reduction of capacity, higher internal resistance, shorter battery life |
| Loose Sealing of Battery Joint | Acid overflow | Higher internal resistance |
| Connection Loosening | Improper hardware connection | Higher internal resistance and temperature |
| Low Floating Charge Voltage | Acid crystallization | Reduced capacity and higher internal resistance |
| High Floating Charge Voltage | Gas spills (dry or fugitive, dynamic material falling off) | Reduced capacity and higher internal resistance |
| High Temperature | High operating temperature (short life, dry, fugitive) | Internal resistance and floating charge current increased |
| No Charge after Discharge | Not fully charged within 48 hours after full discharge | Battery damage or collapse |
| Over-discharge | Excessive discharge (plate deformation) | Permanent damage |
| Increase of Electrolyte Internal Resistance | Internal resistance of electrolyte becomes larger | Reduction of rated capacity and higher internal resistance |
| Metal Internal Resistance Increased | Connection problem | Crack or explosion |
Battery performance is very complex, different types of battery characteristics are also with big difference. The main purpose of battery management system (BMS) is to improve the utilization rate of battery, preventing overcharge and over-discharge of battery, prolonging the service life of battery and monitoring the status of battery.
The main analysis functions of HUASU BMSs are as follows:
1. Automatic analysis of battery residual capacity;
2. Analyzing whether the battery is invalid or need to be activated;
3. Analyzing the cell voltage when floating charging and finding out rechargeable battery.
4. Analyzing the cell voltage when floating and finding out the overcharged battery;
5. Analyzing the voltage of floating charging string and judging whether the voltage of charger is too high or too low.